Dimensions ft/lb m/kg
LOA 24.00 7.32
LWL 20.00 6.10
Beam 8.90 2.71
Standard Draft 4.00 1.22
Standard Ballast 950 431
Displacement 3,100 1,406
Engine outboard outboard
100% SA 261 24.25
I 26.25 8.00
J 9.50 2.90
P 28.00 8.53
E 9.75 2.97
SA/Dspl 20 20
Dspl/L 173 173


  • End grained balsa core construction with hand laid‑up glass in both hull & deck.
  • Vinylester resin in outer hull skin for 10 year transferable blister warranty.
  • Full structural main bulkhead glassed to hull & deck.
  • Heavy duty stainless chainplates bolted to main bulkhead.
  • Anodized aluminum mast bearing beam, glassed to hull and grounded to keel.
  • Low maintenance molded V‑berth unit bonded to the hull to form watertight compartment.
  • Aft storage compartments port and starboard with access from below.
  • Self‑bailing cockpit.
  • White gel-coat hull and deck.
  • Molded positive traction non‑skid surface on deck.
  • Hull and deck joint bonded with Plexus structural adhesive.
  • ORC sized white thermo‑plastic toe rail running full length of the deck both sides.

Keel & Rudder

  • Lead & Antimony fin keel finished in epoxy primer.
  • Near minimum weight faired transom-hung rudder.
  • Heavy-duty SS rudder gudgeons and hardware.
  • Custom laminated tiller with hiking stick.

Spars & Rigging

  • Tapered, anodized aluminum racing mast with airfoil spreaders, thru‑bar spreader bracket, Gibb "T" terminals, and black measurement bands.
  • Three sets of holes at 1/2" intervals in mast bearing beam with two stainless fastpins for easy adjustment.
  • 1 x 19 Stainless Standing rigging with open body turnbuckles.
  • Anodized aluminum boom with Harken 5:1 internal outhaul and adjustable reef line.
  • Complete running rigging package

Deck Hardware

  • (2) Two speed primary winches mounted on molded winch pads with
  • Winch handle and plastic holder.
  • (2) black anodized jib tracks, with adjustment holes and two jib block on cars.
  • (2) black anodized genoa tracks, with adjustment holes and cars.
  • Aluminum spinnaker pole.
  • Stainless bow and stern pulpits with 20" stanchions and single lifelines.
  • Foredeck hatch mounted with lid opening forward.
  • White main hatch with molded seahood which slides on white PVC runners.
  • Seahood inspection port for lifting strap access to keel.
  • Bow mooring eye and two bow chocks.
  • Heavy duty stainless stemhead fitting with snap shackle for genoa tack.
  • Two four bolt mooring cleats aft.
  • Bow and Stern navigation lights.

Outboard Motor

  • Lightweight fixed outboard bracket.


  • Teak and holly synthetic cabin sole.
  • (2) adult size settee berths with large storage area below.
  • Large forward V‑berth, with two access boards above mast step area and three inspection ports for access into v‑berth compartment.
  • Waterproof interior lights, 3 function electrical panel.
  • Molded sink with one flexible water tank in cabinet below.
  • Dry goods storage cabinet above sink.
  • Cabinet doors (3) are watertight ports.
  • Molded open storage shelves above settee berths.
  • Molded step box with lid.
  • Stainless lifting bar bolted to keel for hoisting.
  • Acrylic companionway board on white PVC runners.


Specifications are subject to change without prior notice or obligation, J Boats reserves the right to periodically upgrade these specifications through additions, deletions and substitutions.